G797

OBD II GPS Tracker with DTC Codes

  • Description

    The G797 OBDII & J1939 tracking and telemetry unit is a full featured device providing an ideal solution to monitoring mileage, driver behaviour, replay of accident parameters as well as providing a wide range of vehicle diagnostic values. This unit together with its comprehensive optional cabling range provides the ideal solution for large fleets, leasing and rental companies as well as insurance PAYD and PHYD systems.

    Features:

    • 2G/3G Modem Versions
    • 3D Accelerometer for driving behavior
    • AGPS 50 channel high sensitive module
    • Connect & Go
    • Device removal alert
    • DTC Error Codes
    • Geo-Fence Management
    • Ignition status detection (If supported)
    • IP or domain configuration
    • ISO 14230-4 (KWP) and ISO 15765-4 (CAN) protocol
    • ISO 9141-2
    • J1962 OBDII Connector Interface
    • Low power Consumption
    • Original Data (RPM Engine Temperature Engine Run Time Fuel Consumption)
    • Over Rev and overheating alerts
    • Over Speed Management
    • Quad Band GSM Modem
    • UDP TCP and SMS support
  • Product specification

    General

    • Communication Modes : GPRS/EDGE And TCP/UDP/SMS
    • Location Technology : 50 Channels GPS
    • Operating Voltage : 12 & 24 Volt Vehicle Systems

    GPS

    • Location Technology : Ublox GPS (With SBAS, Telit SL869 Glonass (Optional), GPS L1 C/A Code, SBAS, WAAS, EGNOS, MSAS
    • Accuracy : SBAS 2.0m CEP
    • Tracking Sensitivity : -162dBm
    • Antenna : Patch Internal
    • Assist GPS : Supported

    Cellular

    • Data Support : SMS, TCP, UDP
    • GSM/GPRS Quad Band : 850/900/1800/1900 MHz
    • UMTS WCDMA FDD : 800/850/900/1900/2100 MHz (Optional)
    • GSM/GPRS Output Power : Class 4 (2W) For 850 / 900 Bands, Class 1 (1W) For 1800 / 1900 Bands
    • GSM/GPRS Fallback : GPRS Class 10
    • HSPA Data Rate : 5.76Mbps UL/7.2Mbps DL (Optional)
    • SIM Card : 1.8/3.3 V

    Physicals

    • Dimension : 52(L) X 57(W) X 28(H)Mm
    • Weight : 80g
    • Connector : J1962

    Environmental

    • Operating Temperature : -40°C To +80°C ,-10°C To +50°C (Battery Version)
    • Vibration : U.S. Military Standards 202G And 810F, SAE J1455
    • Humidity : 95% RH @ +50°C Non-Condensing
    • EMC/EMI : SAE J1113; FCC–Part 15B
    • RoHS : Complaint (Optional)

    Electrical

    • Operating Voltag : 8-32V DC Operational For 12V & 24V Vehicle Support Per SAE J1455
    • Power Consumption : 3mA 12V (Sleep), 70mA 12V (Power Save), 100mA 12V (Active Tracking)
    • Backup Battery : LI-PO 250mAh Battery Recharging Range Is 0 To +45ºC

    On Board

    • CPU : ARM Cortex M3
    • Flash Memory : 4Mbit (8000 Records)
    • 3D Accelerometer : On Board (Auto Calibrate)

    On Board Diagnostics

    • Supported Protocols : J1939 (CAN 250kbps), J1939 (CAN 500kbps), J1850 PWM, J1850 VPW, ISO 9141-2, ISO 14230-4 (KPW), ISO 15765-4 (CAN), J2411 (SWCAN), KW1281 (J2818), ALDL160 (160 Baud), ALDL8192 (8192 Baud), ISO11898

    Input/Outputs

    • Inputs : Direct Connection To J1962
    • Outputs : None
    • USB : Configuration Firmware Update
    • Bluetooth : Optional
    • Ignition Sense : Internal Managment

    Connectors, SIM Card Access

    • Connector Type : J1962
    • Power Switch : Device Power ON/Off Switch
    • SIM Card : Internal
    • Embedded SIM : Optional

    Mounting

    • Mounting : Direct Connect Or Extension T-Cable
  • Product documentation